The R-26F floorstanding speaker is jam-packed with the best in audio technology for room-filling, audiophile-worthy sound. Your movies and music soar to new heights with the big, powerful sound emitting from this bad boy.
- Fills small to medium rooms with powerful, lifelike performances
- Equally impressive with music and movies
- Highly efficient design produces more output using less energy
- Accurate, non-fatiguing sound provides hours of listening pleasure
- Plays louder with less distortion than the competition
- Dynamic 1" aluminum Linear Travel Suspension horn-loaded tweeter
- Dual 6.5" copper-spun high-output IMG woofers
- Dimensions: 39" H x 13.5" W x 7.8" D
- Brushed black polymer veneer cabinet
MORE OOMPH IN YOUR OHMS
The R-26F features our proprietary 90x90 Tractrix Horn technology mated with an aluminum tweeter, for the most impressive high-end response and greater extension, enhanced imaging and powerful dynamics. This creates the cleanest, most natural sound possible.
MORE FLAIR IN YOUR FIDELITY
The Linear Travel Suspension (LTS) tweeter minimizes distortion for enhanced, detailed performance while the copper-spun Injection Molded Graphite (IMG) woofers provide remarkable low frequency response with minimal cone breakup and distortion. Pair together, it provides speaker efficiency highest in its class.
YOU CAN BUY HAPPINESS. IT’S COPPER AND BLACK.
The R-26F features a front-firing port that is perfectly matched to the cabinet and woofers. This design creates ideal airflow with minimal distortion. Dual, 5-way binding posts provide the benefits of bi-wiring and bi-amping. Finished in a brushed black polymer veneer, the R-26F will indeed piss off your neighbors.
PAIRS WITH DOLBY ATMOS ELEVATION SPEAKERS
The RP-140SA Elevation Speakers sets on top of the R-26F Floorstanding Speaker to seamlessly add the Dolby Atmos overhead effect by reflecting sound off the ceiling down to the listeners.
|FREQUENCY RESPONSE:||38Hz - 24kHz +/- 3dB|
|LOW FREQUENCY EXTENSION:||35Hz|
|SENSITIVITY:||97dB @ 2.83V / 1m|
|POWER HANDLING:||100W Continuous/400W Peak|
|NOMINAL IMPEDANCE:||8 Ohms Compatible|
|HIGH FREQUENCY DRIVERS:||1" (2.54cm) Aluminum diaphragm compression driver mated to 90° x 90° square Tractrix® Horn|
|LOW FREQUENCY DRIVERS:||Dual 6.5" (16.5cm), copper spun magnetically shielded IMG woofers|
|ENCLOSURE TYPE:||Bass-reflex via front-firing port|
|INPUTS:||Dual binding posts / bi-wire / bi-amp|
|HEIGHT:||39" (99.1 cm)|
|WIDTH:||7.8” (19.8 cm)|
|DEPTH:||13.5” (34.5 cm)|
|WEIGHT:||41.9 lbs (19.02 kg)|
|FINISHES:||Brushed Black Polymer Veneer|